MV AGUSTA F4 (2010) Motorcycle
general information, review, specifications and pictures
Motorcycle Wallpapers, choose by BRANDS>
MV AGUSTA Models >
MV AGUSTA F4 (2010)
Click Thumbnail to download (size 1600 x 1200 pixels)
General information
Improving the already legendary F4 has been a dream, until today. MV Agusta has chosen to, once again, push the upper limits of performance and driving pleasure with the new F4. In short, MV Agusta has surpassed perfection.
The new F4 builds on the heritage of the previous model, while at the same time improving on all the technical and performance characteristics by increasing the already vast quantity of technical content.
When the new F4 was designed, MV engineers had a single objective: to build the best supersport motorcycle in the world. F4 should not only be only the most beauti- ful motorcycle in the world or the fastest, it should also be the most effective motor- cycle on the track, the lightest and the most technologically advanced motorcycle. The result is the new F4, unmistakably MV.
The engine, chassis and the swingarm are brand new. The reengineered design which has resulted in a motorcycle that is 4 cm narrower, has a chassis that offers increased torsional rigidity while at the same time reducing the overall weight by 10 kg (22 lbs). The F4 is the absolute reference for the supersport category with its advanced technical solutions and its extraordinary performance.
The chassis, which has been completely redesigned, optimized and incredibly lightened improves the dynamic characteristics of the motorcycle in every situation, allowing a more effective ride on circuit as well as on the road.
All of this was naturally matched with components of the highest level, selected to give the enthusiasts a supersports motorcycle able to satisfy even the most demanding customer.
ENGINE
Type Four cylinder, 4 stroke, 16 valve
Timing system “D.O.H.C”, radial valve
Total displacement 998 cm3 (60.9 cu. in.)
Compression ratio 13.1:1
Starting Electric
Bore x stroke 76 mm x 55 mm (3.0 in. x 2.2 in.)
Max. horse power - r.p.m. (at the crankshaft) Full power version: 137 kW (186 HP) at 12900 - Lim. 13500 r.p.m. / Restricted power version: 73 kW (100 HP) at 9200 - Lim. 10800 r.p.m.
Max. torque - r.p.m. Full power version: 114 Nm (11.4 kgm) at 9500 r.p.m. / Restricted power version: 90 Nm (9.0 kgm) at 5500 r.p.m.
Cooling system Cooling with separated liquid and oil radiators
Engine management system Magneti Marelli IAW 7BM ignition - injection integrated system with Mikuni throttle body; induction discharge electronic ignition;
Sequential timed “Multipoint” electronic injection ; Variable height intake ducts with Torque Shift System (TSS)
Clutch Wet, multi - disc
Gear Box Cassette gearbox; six speed, constant mesh
Primary drive 50/79
Gear ratio
First gear: Speed* 13/38 128,2 km/h (79.6 mph) a t 13500 r. p. m.
Second gear: Speed* 16/34 176,4 km/h (109.5 mph) at 13500 r. p. m.
Third gear: Speed* 18/32 210,8 km/h (130.9 mph) at 13500 r. p. m.
Fourth gear: Speed* 20/30 249,8 km/h (155.1 mph) at 13500 r. p. m.
Fifth gear: Speed* 22/29 284,3 km/h (176.5 mph) at 13500 r. p. m.
Sixth gear: Speed* 19/23 305,0 km/h (189.4 mph) at 13500 r. p. m.
Final velocity ratio 15x41
ELECTRICAL EQUIPMENT
Voltage 12 V
Alternator 350 W at 5000 r. p. m.
Battery 12 V - 8,6 Ah
DIMENSIONS AND WEIGHT
Wheelbase 1430 mm (56.27 in.)
Overall lenght 2100 mm (82.63 in.)
Overall width 750 mm (29.51 in.)
Saddle height 860 mm (33.84 in.)
Min. ground clearance 115 mm (4.52 in.)
Trail 100,4 mm (3.93 in.)
Dry weight 192 Kg (423 lbs.)
Fuel tank capacity 17 l (4.49 U.S. gal.)
PERFORMANCE
Maximum speed* Full power version: 305,0 km/h (189.4 mph) / Restricted power version: 249,0 km/h (154.6 mph)
FRAME
Type CrMo Steel tubular trellis (TIG welded)
Rear swing arm pivot plates: material Aluminium alloy
FRONT SUSPENSION
Type “UPSIDE - DOWN” telescopic hydraulic fork with rebound-compression damping and spring preload external and separate adjustment
Rod dia. 50 mm (1.97 in.)
Travel on leg axis 120 mm (4.72 in.)
REAR SUSPENSION
Type Progressive, single shock absorber with rebound and compression (High speed / Low speed) damping and spring preload adjustment
Single sided swing arm: material Aluminium alloy
Wheel travel 120 mm (4.72 in.)
BRAKE
Front brake Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking band and aluminium flange
Front brake caliper Radial-type, single-piece with 4 pistons - Ø 34 mm (Ø 1.34 in.)
Rear brake Single steel disc with Ø 210 mm (Ø 8.27 in.) diameter
Rear brake caliper With 4 pistons - Ø 25,4 mm (Ø 1.00 in.)
RIM
Front: Material / size Aluminium alloy 3,50 ” x 17 ”
Rear: Material / size Aluminium alloy 6,00 ” x 17 ”
TYRES
Front 120/70 - ZR 17 M/C (58 W)
Rear 190/55 - ZR 17 M/C (75 W)
FAIRING
Material Thermoplastic
Motorcycle Insurance Informations http://www.progressive.com/
|
